Accelerated solvent extraction can be used to extract a 10 g sample Homogenizer assisted extraction (HAE) The HAE extraction was performed by IKAs T10 basic Ultra-Turrax (Staufen im Breisgau, Germany) mixer. faster extraction times and a significant reduction in solvent use. A static extraction step is preferred. For recovery studies, fish Separatory funnel extraction (EPA Method 3510) or automated liquid-liquid extraction (EPA Method 3520) are common extraction techniques for liquid samples. Accelerated solvent extraction is a fast and automatic sample extraction technique that uses elevated temperatures and pressures with liquid solvents to obtain fast and efficient extractions. Accelerated solvent extraction ASE is an extraction technique use high temperature and pressure with possible better recovery and has been used as a control. Pressurized Liquid/Accelerated Solvent 6.2.1. This study investigates effects of accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE) on Accelerated solvent extraction has been demonstrated to be equivalent to existing extraction methodologies such as Accelerated solvent extraction (ASE) is a technique which attempts to merge the beneficial solvation properties of SFE with traditional organic solvents. 6.2. In the rst step, the feed is mixed with the solvent to create a high surface area allowing to Chris Hemsworth Example : The regular expression ab+c will give abc, abbc, abbc, and so on Extraction is a method used for the separation of organic compound from a mixture of compound Bofill JA, Rust OA, Schorr SJ Bofill JA, Rust OA, Schorr SJ. The extraction solvent should be carefully selected to achieve the desired extraction. Extraction temperature can be range from 60 to 100C for 30 min static extraction. In this study, the ASE method was applied to the extraction of polycyclic aromatic hydrocarbons (PAHs) from biological samples.
This method is similar to that of the oil extraction method where the deoiled algae are mixed with solvent (ethanol and This is significant to natural products analysis, as having enough material for isolation after metabolomics analysis is often a critical limiting factor in analysis. The accelerated solvent extraction technique improves the extraction efficiency of plasticizers from polymers by using elevated temperature and pressure. Accelerated solvent extraction (ASE) is applied for the extraction of monomers and oligomers from polymeric samples. Introduction The use of accelerated solvent extraction in the extraction of chlorinated herbicides from solid wastes is more convenient, faster, and less solvent-intensive than previous methods. The procedures described in this Application Note meets the requirements for sample extraction as prescribed by U.S. EPA Method 3545. Solvent extraction is the most widely used method [ 47 ]. Outline a statistical DOE approach that can be used to obtain optimum ASE parameters for the analysis of anthracene. The ASE solvent was an 85:15 v/v petroleum ether/chloroform mixture at 40 C and 1500 psi followed by solid phase extraction. Accelerated, microwave-assisted, and conventional solvent extraction methods affect anthocyanin composition from colored grains. 2. Biomass Extraction Methods 393 2.3. The extraction temperature and the type of solvent used are found to be the most important parameters affecting the ASE extraction efficiency of polymeric samples. We describe a new technique for sample preparation, accelerated solvent extraction (ASE), that combines elevated temperatures and pressures with liquid solvents. sample extraction to improve analyte stability and extract quality. Pressurized liquid extraction (PLE), also known as accelerated solvent extraction, was introduced for the first time in 1995. Extraction of natural products in an economic and environmentally-friendly way is of high importance to all industries involved.
Maceration. Pressurized Solvent Extraction (PSE) Pressurized solvent extraction or accelerated solvent extraction, employs temperatures that are higher than those used in other methods of extraction, and requires high pressures to maintain the solvent in a liquid state at high temperatures.
Natural products are sought after by the food, pharmaceutical and cosmetics industries, and research continues into their potential for new applications. To achieve efficient extraction, proper sample preparation techniques and operational parameters must be selected. In this method, the solvent is pumped into the extraction cell with static valve 30 open, flow is established through the cell and a small amount, usually about 1 ml, is collected at the outlet. Natural products are sought after by the food, pharmaceutical and cosmetics industries, and research continues into their potential for new applications.
Because existing solvent-based extraction methods can be readily transferred to ASE technology, methods development is greatly simplified. Expand It could be used for the extraction of thermolabile components.]. *Pressure studies show that 1500 psi is the optimum extraction pressure for all accelerated solvent extraction applications. Analysis GC-MS Results House dust sample in NCI (top) and El-SRM (bottom) showing BDE47 at a level of 0.07 ppb. A More Cost-efficient Extraction Method for Polycyclic Aromatic Hydrocarbons (PAH) in Sediments and Soils using Accelerated Solvent Extraction (ASE) Effectiveness of Accelerated Solvent Extraction Compared to QuEChERS Methods for the Multiresidue Analysis of Pesticides in Organic Honey by GC-MS/MS This study investigates effects of accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE) on anthocyanin composition and extraction efficiency from blue wheat, purple corn, and black rice in comparison with the commonly used solvent extraction (CSE). ASE application has been reported for the analysis of only Using solvents at high temperatures and pressures, the ASE system extracts compounds from solid and semi-solid samples quickly with small solvent volume. All Photos (1 BNAs extraction time reduces from 36 hours to 12 hours.
Share sensitive information only on official, secure websites. Sample is packed with inert material such as sand in the stainless steel extraction cell Accelerated solvent extraction (ASE) is a method for extracting various chemicals from a complex solid or semisolid sample matrix.The process uses high temperature and pressure, which results in the extraction taking less time and requiring less solvent, and possibly also giving better analyte recovery, than traditional methods that use less extreme conditions. Simultaneous determination of malachite green, gentian violet and their leuco-metabolites in shrimp and salmon by liquid chromatographytandem mass spectrometry with accelerated solvent extraction and auto solid-phase clean-up The MARS 6 heats samples in a sealed vessel, allowing the use of solvents not accessible with traditional methods. Supercritical Fluid Extraction (SCF), Accelerated Solvent Extraction (ASE) and Ultrasonic Assisted Extraction (UAE) are invented to compensate the increasing demand of natural products. SW-846 method 3520 and E.P.A. Extraction is the separation of medicinally active portions of plant using selective solvents through standard procedures. A study on the extraction of catechin (1, Fig. Accelerated Solvent Extraction. The dried sample was weighed with an analytical balance and transferred to a 15 mL falcon tube, followed by the addition of 5 mL of the solvent and extraction using the mixer at a fixed rotation of 15.360 rpm for a Extraction process requires only 100mL of solvent versus 500mL, an 80% reduction. is not possible by Distillation and when relative Volatility is Greater than 1 Extraction method is used for separation of the components. Concentrated sulfuric acid was added to the silica gel (1:1 v/v) and shaken vigorously until the con tents exhibit dry, powdery appearance and stored at room Accelerated solvent extraction (ASE) is a new sample extraction method offering number of advantages, such as low extraction cost, reduced solvent and time consumption, and simplified extraction protocols. An automated method had been developed for the determination of Malachite green and Gentian violet as well as their leuco-metabolites in shrimp and salmon by liquid chromatography-tandem mass spectrometry with accelerated solvent extraction and auto solid-phase clean-up. Free Chemical Reactions calculator - Calculate chemical reactions step-by-step Unfortunately acetone will dissolve almost anything, including the stuff you dont want Extraction - the technique Sketched to the right is a typical setup of the extraction apparatus, consisting of a separatory funnel, conical flask, retort stand and ring holder DEA In addition, UAE is considered an effective method for improving extraction efficiency in some phytochemicals such as hypericin, pseudohypericin, hyperoside, rutin, quercitrin, and hyperforin from Hypericum perforatum L when compared to conventional maceration, soxhlet extraction, indirect sonication, and accelerated solvent extraction. Hence a simple, rapid and efficient method has been developed for the isolation of piperine from the
This book presents a holistic and in-depth view of the techniques available for Guayule (Parthenium argentatum Gray) is a promising alternative source to Hevea brasiliensis for the production of natural rubber, which can reach levels of 89% under industrialized farming conditions. 1) from Arbutus unedo L. fruits using maceration, microwave-assisted and ultrasound extraction techniques showed that microwave extractor cup only.
Extractions using separatory funnels are less time consuming and less expensive to set up, but have issues with samples that tend to form emul-sions with the extraction solvent. The solvents used are those normally used for Accelerated solvent extraction is an established technique used for fast, accurate sample preparation of air filters, soils, solids, and wastes. Pyrex extraction apparatus, accelerated One-Step modular. An organic solvent system is used to extract analytes under elevated temperatures and pressures above 100 psi but below supercritical conditions in short This study investigates effects of accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE) on anthocyanin composition and extraction efficiency from blue wheat, purple corn, and black rice in comparison with the commonly used solvent extraction (CSE). ASE methods are established and accepted in the environmental, pharmaceutical, foods, polymer, and consumer products industries. Search: Ab Extraction. Many of the organic solvents used in these extractions boil at relatively low temperatures at atmospheric pressure (e.g., acetone boils at 56 C). Extractions using the Dionex Accelerated Solvent Extractor (ASE 350) were compared to a hand-solvent extraction for terpene analysis. Coupled with rapid solvent reduction systems, the often labor-intensive steps of sample preparation can be automated in your laboratory. Although solventless and hydrodynamic extraction are known for their high yield and feasibility, more investigation is needed in these areas. Accelerated Solvent Extraction is a fully automated technique, so it could be especially useful for routine analyses of environmental pollutants and food. Today, there are two commonly used buffered methods. In this study, the ASE method was applied to the extraction of polycyclic aromatic hydrocarbons (PAHs) from biological samples.
Accelerated solvent extraction (ASE) ASE is an efficient form of liquid solvent extraction compared to maceration and Soxhlet extraction as the method use minimal amount of solvent. Mohd Saaya,B.
Three chemical varieties (chemovars) were used to evaluate both extraction techniques. Since its introduction in 1995, the accelerated solvent extraction system (ASE) has been used as an alternative to traditional Soxhlet extraction methods. Hand shakeout vs. accelerated solvent extraction (ASE 350) for extraction of terpenes from cannabis flower In addition, several factors were considered when selecting the extraction method. The Dionex ASE 150 and ASE 350 continue to deliver the proven ASE technology for solvent extraction of any solid sample. Search: Ab Extraction.
Various methods, such as Maceration, Infusion, Percolation, Decoction, Digestion, Soxhlet extraction, Microwave assisted extraction, Ultrasound-assisted extraction, Accelerated solvent extraction and Supercritical fluid extraction are used for the The system is designed to extract up to 24 samples unattended. European Committee for Standardization (CEN) Method 156628 uses a citrate buffer for extraction.
Volatile oils naturally separate from hydrosols. Valve 30 is then closed, and the system is pressurized to the appropriate pressure. These methods are less popular due to high cost despite the efficiency of the methods. Semi-continuous solvent extraction methods are commonly used to increase the efficiency of lipid extraction from foods. It is accepted by the U.S. EPA as Method 3545 for environmental samples, and it has been applied to other sample extraction areas. In this study, MTBE, an organic solvent with a density less than that of water, was used as the extraction solvent and spiked into the collection bottle to extract the condensate without optimization. Podbielniak Accelerated Solvent Extraction (Liquid-Liquid) Centrifuge Extraction methods include solvent extraction, distillation method, pressing, and sublimation according to the extraction principle. In this study, protein from the deoiled algae biomass was assumed to be separated by the solvent extraction method using ethanol (95%) and methanol (5%) [57]. The most common method for determining rubber concentration is by accelerated solvent extraction (ASE), a technique developed by the Dionex Corporation and a number of accelerated oxidation tests have been developed to speed up this process. The extractor, called an Accelerated Solvent Extractor, or ASE (Figure 2), can hold up to 24 individual samples. A series of extractions with a solvent with a solubility parameter several Hildebrand units (MPa 1/2 ) different from the polymer are carried out at increasing temperatures until maximum extraction is reached. both small and larger scale of phytochemical extraction. Abstract. Using an experimental design approach the influence of operating variables (pressure, temperature and extraction time) on the recovery of seven phenols that have been slurry spiked on soil has been investigated. After extraction, the spent sample remains in the cell, whereas the extract is immediately ready for processing. Solvay offers a broad range of solvent extractants for purification and concentration of copper, nickel/cobalt, lithium, molybdenum, rare earths and various other metals. The extraction cell (25) is mounted between a pump (14) and a sample collection vial Accelerated solvent extraction is a relatively new extrac-tion technique that uses elevated temperature and pressure to expedite the removal of analytes from various matrices.
Accelerated solvent extraction is an efficient form of liquid solvent extraction, so all of the principles inherent to that technique apply. The increase in extraction temperature and the contact efficiency of the solvent-sample matrix in ASE can greatly shorten the required extraction time for lipids [23,24]. Accelerated solvent extraction is a trademarked (Thermo Scientific Dionex) method of extraction that utilizes high temperatures (~100 C) and pressures (~1,200 psi) to increase the kinetics of the extraction process. A simple solvent selection procedure for accelerated solvent extraction (ASE ) of polymers is described using Hildebrand solubility parameters. Also, when the Distillation Method used is too expensive, (PFE) or Accelerated Solvent Extraction (ASE), Shake Flask Extraction and Matrix Solid Phase Dispersion (MSPD) [4]. The solvent of water is commonly used in the method , and the other method includes subcritical water extraction, superheated water extraction, pressurized liquid extraction, and accelerated solvent extraction [34, 35, 36]. Based on this review, solvent extraction is the most common method for cannabis plants.
This method is similar to that of the oil extraction method where the deoiled algae are mixed with solvent (ethanol and This is significant to natural products analysis, as having enough material for isolation after metabolomics analysis is often a critical limiting factor in analysis. The accelerated solvent extraction technique improves the extraction efficiency of plasticizers from polymers by using elevated temperature and pressure. Accelerated solvent extraction (ASE) is applied for the extraction of monomers and oligomers from polymeric samples. Introduction The use of accelerated solvent extraction in the extraction of chlorinated herbicides from solid wastes is more convenient, faster, and less solvent-intensive than previous methods. The procedures described in this Application Note meets the requirements for sample extraction as prescribed by U.S. EPA Method 3545. Solvent extraction is the most widely used method [ 47 ]. Outline a statistical DOE approach that can be used to obtain optimum ASE parameters for the analysis of anthracene. The ASE solvent was an 85:15 v/v petroleum ether/chloroform mixture at 40 C and 1500 psi followed by solid phase extraction. Accelerated, microwave-assisted, and conventional solvent extraction methods affect anthocyanin composition from colored grains. 2. Biomass Extraction Methods 393 2.3. The extraction temperature and the type of solvent used are found to be the most important parameters affecting the ASE extraction efficiency of polymeric samples. We describe a new technique for sample preparation, accelerated solvent extraction (ASE), that combines elevated temperatures and pressures with liquid solvents. sample extraction to improve analyte stability and extract quality. Pressurized liquid extraction (PLE), also known as accelerated solvent extraction, was introduced for the first time in 1995. Extraction of natural products in an economic and environmentally-friendly way is of high importance to all industries involved.
Maceration. Pressurized Solvent Extraction (PSE) Pressurized solvent extraction or accelerated solvent extraction, employs temperatures that are higher than those used in other methods of extraction, and requires high pressures to maintain the solvent in a liquid state at high temperatures.
Natural products are sought after by the food, pharmaceutical and cosmetics industries, and research continues into their potential for new applications. To achieve efficient extraction, proper sample preparation techniques and operational parameters must be selected. In this method, the solvent is pumped into the extraction cell with static valve 30 open, flow is established through the cell and a small amount, usually about 1 ml, is collected at the outlet. Natural products are sought after by the food, pharmaceutical and cosmetics industries, and research continues into their potential for new applications.
Because existing solvent-based extraction methods can be readily transferred to ASE technology, methods development is greatly simplified. Expand It could be used for the extraction of thermolabile components.]. *Pressure studies show that 1500 psi is the optimum extraction pressure for all accelerated solvent extraction applications. Analysis GC-MS Results House dust sample in NCI (top) and El-SRM (bottom) showing BDE47 at a level of 0.07 ppb. A More Cost-efficient Extraction Method for Polycyclic Aromatic Hydrocarbons (PAH) in Sediments and Soils using Accelerated Solvent Extraction (ASE) Effectiveness of Accelerated Solvent Extraction Compared to QuEChERS Methods for the Multiresidue Analysis of Pesticides in Organic Honey by GC-MS/MS This study investigates effects of accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE) on anthocyanin composition and extraction efficiency from blue wheat, purple corn, and black rice in comparison with the commonly used solvent extraction (CSE). ASE application has been reported for the analysis of only Using solvents at high temperatures and pressures, the ASE system extracts compounds from solid and semi-solid samples quickly with small solvent volume. All Photos (1 BNAs extraction time reduces from 36 hours to 12 hours.
Share sensitive information only on official, secure websites. Sample is packed with inert material such as sand in the stainless steel extraction cell Accelerated solvent extraction (ASE) is a method for extracting various chemicals from a complex solid or semisolid sample matrix.The process uses high temperature and pressure, which results in the extraction taking less time and requiring less solvent, and possibly also giving better analyte recovery, than traditional methods that use less extreme conditions. Simultaneous determination of malachite green, gentian violet and their leuco-metabolites in shrimp and salmon by liquid chromatographytandem mass spectrometry with accelerated solvent extraction and auto solid-phase clean-up The MARS 6 heats samples in a sealed vessel, allowing the use of solvents not accessible with traditional methods. Supercritical Fluid Extraction (SCF), Accelerated Solvent Extraction (ASE) and Ultrasonic Assisted Extraction (UAE) are invented to compensate the increasing demand of natural products. SW-846 method 3520 and E.P.A. Extraction is the separation of medicinally active portions of plant using selective solvents through standard procedures. A study on the extraction of catechin (1, Fig. Accelerated Solvent Extraction. The dried sample was weighed with an analytical balance and transferred to a 15 mL falcon tube, followed by the addition of 5 mL of the solvent and extraction using the mixer at a fixed rotation of 15.360 rpm for a Extraction process requires only 100mL of solvent versus 500mL, an 80% reduction. is not possible by Distillation and when relative Volatility is Greater than 1 Extraction method is used for separation of the components. Concentrated sulfuric acid was added to the silica gel (1:1 v/v) and shaken vigorously until the con tents exhibit dry, powdery appearance and stored at room Accelerated solvent extraction (ASE) is a new sample extraction method offering number of advantages, such as low extraction cost, reduced solvent and time consumption, and simplified extraction protocols. An automated method had been developed for the determination of Malachite green and Gentian violet as well as their leuco-metabolites in shrimp and salmon by liquid chromatography-tandem mass spectrometry with accelerated solvent extraction and auto solid-phase clean-up. Free Chemical Reactions calculator - Calculate chemical reactions step-by-step Unfortunately acetone will dissolve almost anything, including the stuff you dont want Extraction - the technique Sketched to the right is a typical setup of the extraction apparatus, consisting of a separatory funnel, conical flask, retort stand and ring holder DEA In addition, UAE is considered an effective method for improving extraction efficiency in some phytochemicals such as hypericin, pseudohypericin, hyperoside, rutin, quercitrin, and hyperforin from Hypericum perforatum L when compared to conventional maceration, soxhlet extraction, indirect sonication, and accelerated solvent extraction. Hence a simple, rapid and efficient method has been developed for the isolation of piperine from the
This book presents a holistic and in-depth view of the techniques available for Guayule (Parthenium argentatum Gray) is a promising alternative source to Hevea brasiliensis for the production of natural rubber, which can reach levels of 89% under industrialized farming conditions. 1) from Arbutus unedo L. fruits using maceration, microwave-assisted and ultrasound extraction techniques showed that microwave extractor cup only.
Extractions using separatory funnels are less time consuming and less expensive to set up, but have issues with samples that tend to form emul-sions with the extraction solvent. The solvents used are those normally used for Accelerated solvent extraction is an established technique used for fast, accurate sample preparation of air filters, soils, solids, and wastes. Pyrex extraction apparatus, accelerated One-Step modular. An organic solvent system is used to extract analytes under elevated temperatures and pressures above 100 psi but below supercritical conditions in short This study investigates effects of accelerated solvent extraction (ASE) and microwave-assisted extraction (MAE) on anthocyanin composition and extraction efficiency from blue wheat, purple corn, and black rice in comparison with the commonly used solvent extraction (CSE). ASE methods are established and accepted in the environmental, pharmaceutical, foods, polymer, and consumer products industries. Search: Ab Extraction. Many of the organic solvents used in these extractions boil at relatively low temperatures at atmospheric pressure (e.g., acetone boils at 56 C). Extractions using the Dionex Accelerated Solvent Extractor (ASE 350) were compared to a hand-solvent extraction for terpene analysis. Coupled with rapid solvent reduction systems, the often labor-intensive steps of sample preparation can be automated in your laboratory. Although solventless and hydrodynamic extraction are known for their high yield and feasibility, more investigation is needed in these areas. Accelerated Solvent Extraction is a fully automated technique, so it could be especially useful for routine analyses of environmental pollutants and food. Today, there are two commonly used buffered methods. In this study, the ASE method was applied to the extraction of polycyclic aromatic hydrocarbons (PAHs) from biological samples.
Accelerated solvent extraction (ASE) ASE is an efficient form of liquid solvent extraction compared to maceration and Soxhlet extraction as the method use minimal amount of solvent. Mohd Saaya,B.
Three chemical varieties (chemovars) were used to evaluate both extraction techniques. Since its introduction in 1995, the accelerated solvent extraction system (ASE) has been used as an alternative to traditional Soxhlet extraction methods. Hand shakeout vs. accelerated solvent extraction (ASE 350) for extraction of terpenes from cannabis flower In addition, several factors were considered when selecting the extraction method. The Dionex ASE 150 and ASE 350 continue to deliver the proven ASE technology for solvent extraction of any solid sample. Search: Ab Extraction.
Various methods, such as Maceration, Infusion, Percolation, Decoction, Digestion, Soxhlet extraction, Microwave assisted extraction, Ultrasound-assisted extraction, Accelerated solvent extraction and Supercritical fluid extraction are used for the The system is designed to extract up to 24 samples unattended. European Committee for Standardization (CEN) Method 156628 uses a citrate buffer for extraction.
Volatile oils naturally separate from hydrosols. Valve 30 is then closed, and the system is pressurized to the appropriate pressure. These methods are less popular due to high cost despite the efficiency of the methods. Semi-continuous solvent extraction methods are commonly used to increase the efficiency of lipid extraction from foods. It is accepted by the U.S. EPA as Method 3545 for environmental samples, and it has been applied to other sample extraction areas. In this study, MTBE, an organic solvent with a density less than that of water, was used as the extraction solvent and spiked into the collection bottle to extract the condensate without optimization. Podbielniak Accelerated Solvent Extraction (Liquid-Liquid) Centrifuge Extraction methods include solvent extraction, distillation method, pressing, and sublimation according to the extraction principle. In this study, protein from the deoiled algae biomass was assumed to be separated by the solvent extraction method using ethanol (95%) and methanol (5%) [57]. The most common method for determining rubber concentration is by accelerated solvent extraction (ASE), a technique developed by the Dionex Corporation and a number of accelerated oxidation tests have been developed to speed up this process. The extractor, called an Accelerated Solvent Extractor, or ASE (Figure 2), can hold up to 24 individual samples. A series of extractions with a solvent with a solubility parameter several Hildebrand units (MPa 1/2 ) different from the polymer are carried out at increasing temperatures until maximum extraction is reached. both small and larger scale of phytochemical extraction. Abstract. Using an experimental design approach the influence of operating variables (pressure, temperature and extraction time) on the recovery of seven phenols that have been slurry spiked on soil has been investigated. After extraction, the spent sample remains in the cell, whereas the extract is immediately ready for processing. Solvay offers a broad range of solvent extractants for purification and concentration of copper, nickel/cobalt, lithium, molybdenum, rare earths and various other metals. The extraction cell (25) is mounted between a pump (14) and a sample collection vial Accelerated solvent extraction is a relatively new extrac-tion technique that uses elevated temperature and pressure to expedite the removal of analytes from various matrices.
Accelerated solvent extraction is an efficient form of liquid solvent extraction, so all of the principles inherent to that technique apply. The increase in extraction temperature and the contact efficiency of the solvent-sample matrix in ASE can greatly shorten the required extraction time for lipids [23,24]. Accelerated solvent extraction is a trademarked (Thermo Scientific Dionex) method of extraction that utilizes high temperatures (~100 C) and pressures (~1,200 psi) to increase the kinetics of the extraction process. A simple solvent selection procedure for accelerated solvent extraction (ASE ) of polymers is described using Hildebrand solubility parameters. Also, when the Distillation Method used is too expensive, (PFE) or Accelerated Solvent Extraction (ASE), Shake Flask Extraction and Matrix Solid Phase Dispersion (MSPD) [4]. The solvent of water is commonly used in the method , and the other method includes subcritical water extraction, superheated water extraction, pressurized liquid extraction, and accelerated solvent extraction [34, 35, 36]. Based on this review, solvent extraction is the most common method for cannabis plants.