BUT, why does it say 5w-30 is only good up to 10C ? As the engine warms up the oil will thicken. 10W30 is referred to as a multi-grade oil or blended oil.
MAG 1 Conventional 10W-30 Motor Oil is formulated for older vehicles and/or high-temperature climates, if thicker oil is preferred. 10w30 and 10w40 weights are different. 10W-30 synthetic oil's range is between -25C/-13F to 30C/86F (sometimes -30C/-22F to 35C/95F) while a 10W-40 is from -30C/-22F to 40C/104F. This motor oil is also thinner in low temperatures.
So when you changed to 5-30 the clearances were bigger at start up so you had a little hammer effect until the oil pressure came up. At normal operating temperature, a single grade oil with a viscosity rating of 5 would be too thin to protect our engine. Oil should be changed after the first 20-30 hours of operation and every 100 hours of run time thereafter.
The viscosity of the winter number is tested at 0 degrees Fahrenheit. For K-Series and Magnum engines, use SAE 30 oil for temperatures above 32 degrees F. Click to see full answer.
. .
The 5W-20 will have a lower viscosity and provide less resistance than the 10W-30 at both start-up and normal engine operating temperatures.
The lower the number before the W (for "winter"), the better it flows in cold temperatures.
The 0W-20 oil range is between -40F to 68F.
When to Use 10w30 vs 5w30. A premium synthetic blend mixed-fleet engine oil formulated to protect lower-emission 2017 greenhouse (GHG17) diesel engines. AMSOIL Signature Series 5W-30 showed 38% less oil consumption than the tested conventional oil, requiring less-frequent top-offs, in the ASTM D5800 NOACK volatility test - 100% fully synthetic 3 Best motor oil brand - Castrol 5W-40 engine oil 3 Best motor oil brand - Castrol 5W-40 engine oil. A significant temperature drop will thicken the oil, hindering its flow and eventually hindering the engine performance. Focusing more on the second part of the rating - the '30' versus '40' - we know that the engine oil with a 10W40 rating will be able to retain its 'thickness' or viscosity a lot longer than the engine oil with a rating of 10W30.
The reason for this flexibility is that it comes with a special additive called polymer that changes its traits when temperature rises or falls. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for .
GD-H1311 Engine Oil Noack . The thinner the oil viscosity, the better the fuel economy will be because the lubricant flows easier. Apr 8, 2005 We're in America. Promotes improved fuel economy in new-generation engines. By contrast, 10W30 is slightly more viscous in cold . . This oil behaves normally in these ambient temperatures.
Temp. Engine oils are generally formulated oils. This oil does not offer a wide operating temperature range like the 5W30, but it is still great for use in a large range of environments. The "w" behind the five and the 10 indicates that those are the viscosities in colder or winter temperatures. However, it's a comparatively thicker oil and has a consistency similar to grease. You will first need to know what oil viscosity is and what the numbers of . These specs allow 10w30 engine oil to operate under hot conditions for extended periods without undermining engine performance. 5w30 Vs 10w30 Comparison If your car needs SAE 10W-30 engine oil, Castrol offers a range of options, all of which flow like 10 Weight oil when cold, and 30 Weight oil at full engine operating temperature. But they both have the same high or operating temperature viscosity rating of 40. The oil in your car flows properly when it is at a normal temperature which means 100 degrees Celsius. 10W30 - Multigrade Oil. 10W-30 : 10W-40 : 10W : 5W-30 : 5W-20 Note that machine operating temperatures - and lubricant temperatures - does not change significantly with different ambient temperatures. The operating temperature of 10w30 is more common than the operating temperature of 10w40. SAE 10w-30 engine oil. For a cold start, the engine prefers a lower viscosity so that the oil can quickly move around and lubricate the engine parts.
This was an ordinary 10W30 CJ-4 oil but with a FL1995 Powerstroke style filter, which is a bit more efficient than the standard FL784. Pail Bottle-30 to 200 Amber: Yes: 0000000: 0000: 12: 00000000: 00000: 10W-30: 5 gal. BROWSE CATALOG. The difference between 10w30 and 10w40 is the thickness of the oil at operating/high temperatures, at which 10w40 is thicker than 10w30. Stens 770-133 . this is a 2013 unit,. The 30 refers to the viscosity at higher temperatures.
Decomposition temperature : No data available Viscosity Viscosity, dynamic : No data available . All season formula for operation in broad temperature range; Antioxidants prevent rust and erosion; Meets API SL Rating; Priced per case, sold per case; Specially formulated for small engines; 10w30 is suited for hot temperatures while 5w30 works best at colder areas such as Canada and Los . If the oil will be in the engine during winter and you live in a place where .
20: this is the oil's viscosity rating at high temperatures.
Yes, for operating at lower temperatures with retaining the proper fluid viscosity, SAE 10W30 motor oil is the best-suited option.
Valvoline Advanced Full Synthetic, the motor oil designed to protect today's sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. manual says use syn.
For example, let's dissect what "5W30" means. When your engine is being broken in the bearing wear allows for the viscosity of the break in oil. 10W30 vs 10W40 Differences. The last number represents the equivalent oil grade when it is hot. In this case, the 5w30 is as viscous as a straight 30 weight oil.
10w30, however, has a smaller temperature window.
Knowing the temperature spectrum helps you choose the right oil. It says 10W-30 is good from -25C to 40C (it would never get below -10C anywhere I ever go!)
10w30 is a multi-grade gear oil that changes its viscosity level as temperature changes. Range, F: Color: With Detergent : Each: .
It is recommended for temperatures down to -20 degrees Fahrenheit.
We offer a variety of . I have a tractor mower that changes to a snow blower for the winter,. Personnally, I feel much more comfortable down around the 260 to 270 range. Oil flow Temperature range for 5w30 and 5w40; 5w30 is used in temperature ranges from -25C to 25C, while 5w40 from -25C to 35C.
certified SAE 10W30 4Stroke Marine Engine Oil is recommended for general, alltemperature use.
The low-temperature viscosity rating of 10w40 is '10' whereas for 115w40 it is '15'. Answer (1 of 14): Surejust don't drive in winter,, and don't speed in summer. Temp.
Most engine manufacturers recommend a 5W or 10W oil for cold-weather starting. For working viscosity of 30, this parameter should be at least 2.9 at 150g. There are no much differences between the two oils in terms of the temperature range. 10W30 - Multigrade Oil.
A straight 30 weight oil is very thick cold and thins out a lot as it heats up. The 5340 motor oil can also be used in a temperature range of negative two hundred fifty (-250) degrees celsius to three hundred fifty (350) degrees celsius.
Range, F: Color: With Detergent : Each: . SAE 10W-30, 55 gallon drum. Therefore, a product with a 0 or 5 cold weather rating will be thinner and will flow more easily than a 10 or 20 rated one. by craftsman,.
Mobil Super Synthetic 10W-30 is a full synthetic high-performance motor oil that provides excellent high temperature protection even under severe operating conditions. 10W30 is referred to as a multi-grade oil or blended oil. 10w30 is easier to find and much less expensive than 10w40. That's why we use a multigrade oil like 5w30. In stock and ready to ship. Below 40F (4.4C) and down to -10F (-23C), use 10W-30. KOHLER SAE30 OIL PN 25 357 02-S case (12/1 qt.)
BROWSE CATALOG. In comparison, the 5W20 oil range is -31F to 68F, while 5W30 is rated for -31F to 104F. Both have almost the same characteristics, and the only difference is the oil viscosity.
A significant temperature drop will thicken the oil, hindering its flow and eventually hindering the engine performance. The viscosity index for the 15w40 motor oil stands at 135, whereas for 10w40, it is 150. 10W30. In SAE 30, there is one number. The fix is additives.
Different oil types can work best at certain temperatures. and 40 grade can be as thin as 12.5 cST (Centistokes) or as thick as 16.2 cSt at that temp.
Repco's range of Caltex engine oils has been selected to protect the life and performance of your engine, with a core range of products to suit your needs i would say if you have an older aircooled vw SAE 10W-30- Varying temperature range, this grade of oil improves cold-weather Purchase the right oil for your engine at shop SAE 30 w is usually . The "20" winter, in the 20w-50, is the oil viscosity when cold.
Technical Data Sheet Shell ROTELLA T5 10W-30 Better Fuel Economy Performance Improved Low Temperature Flow Synthetic Blend Technology Heavy Duty Diesel Engine Oil Shell ROTELLA T5 heavy duty engine oil with Triple Protection PlusTM technology has been enhanced with synthetic base oils plus advanced additive technology to protect against wear, deposits and oil breakdown,
oil 5w40 you can get better use out of the oil if the Temp. Older engines can use the SAE30, while the 10W30 is for modern engines.
10 is the cold weather viscosity rating for 10W30. Some people have the misconception that 10W-30 and 10W-40 engine oils are fundamentally different. has a ,wide range.
what this means is that the oil industry scientists, in their labs, have created lubricants that flow better at low temperatures than . Jun 5, 2002. It has two numbers: xx-W-yy.
5w-20. I'm serious: ANY oil will work, for a while, but if you want it to start in winter, and last a long time, follow the Book!
This difference is because 10w30 motor oil is a multigrade oil, which means that it can maintain an ideal viscosity over a wider temperature range. The difference between 10W30 multi - grade and straight grade oil is that it has been formulated to provide a 10W viscosity at very low temperatures to aid in cold-cranking in heavy engines. 10w30 is a upgrade, I use syn. It is designed to help provide long engine life and outstanding protection in vehicles of all ages, outperforming our conventional-synthetic blended . At 100C operating temperature, both SAE 30 and SAE 10W30 oil act the same with a rarely visible difference.
"5W" - the oil has a relative viscosity of "5" in "winter", which means it will flow quite easily in cold temperatures. To a great extent, this indicator gives an idea of how much the oil sustains in extreme loads.
------------------. This number represents an oil's ability to maintain its resistance to hardening and thickening at 0 degrees Celsius. Note that operational temperature is a different thing, which is typically higher than the ambient temperature. Delo 400 ZFA SAE 10W-30. ; SAE 10W-30- Varying temperature range, this grade of oil improves cold-weather starting, but may increase oil consumption. They consist of mineral, semi- or fully synthetic base oil (base stocks) plus a varying number and amount of additives. The quality of an engine oil depends on the base stock and its properties as well as on the additives.
0000000: 000000: Semisynthetic Base Oil. Provides high performance piston deposit control and turbocharger . Unless the temp drops below zero, 32 deg is generally in the middle of the temp spectrum for most oils. Due to new technology, there are oils that are much thinner, especially used on Japanese models with var.
Mobil told the Spring Mountain mechanics if it was below 300, on the track, don't worry about it. Oddometer: 298. . 5w30 oils have a temperature range of -22 degrees Celsius to 35 degrees Celsius while that of 10w30 oil is between -18 degrees Celsius to 30 degrees Celsius. In SAE 30, there is one number. Temperature - Fuels oil viscosities vs. temperature. Pail Read to know more about the oil grades before taking a final decision on which to use on your lawnmower. The oil is less slippery when it cools down to 25C or thereabouts.
w: this stands for "winter," and is part of the "5" rating. % ASTM D5185: 0.059:
The oil used should meet Ford's specification of WSS-M2C171-D or API CI-4 PLUS, CI-4/SL or DHD-1.
You see, the Mobil 1 SAE 10W30 oil replaces many straight 30 oil compatible engines. Learn which one to choose for your climate. Is not 30 grade oil always 30 grade? At operating temperatures, both oils will have the same viscosity (30) and will flow and protect identically. Sadly, that quick answer doesn't make it any easier to understand. Today's advanced engine technology requires advanced protection.
The number after the dash indicates how well the oil flows when it's warm. The lower the number, the thinner the oil. 10w40 is thicker, and creates less pressure but has more film strength.
A wide range. AMSOIL 10W-40 Formula 4-Stroke Marine Synthetic Motor Oil contains the best anti-wear base oils and additives on the market. Some manufacturer's allow this option, others don't, because it depends on the engine and the . It's actually about 320 when the oil start to lose it's effectiveness.
Choose from our selection of sae viscosity grade 10W-30 oil in a wide range of styles and sizes.
If you are running a vehicle in a hot area with a temperature as high as 40 (104), choose 5w30 motor oil .
5w30 works excellently under high temperatures and will thus provide more excellent motor protection. 10W-30 Oil Temperature Range The ambient temperature range (the temperature outside) for 10W-30 oil is -30 degrees Celcius (-22 F) and 35 degrees Celcius (95 degrees).
If it is a multi-grade say 10-30 then the bearing clearances will be greater.
MAG 1 Conventional 10W-30 Motor Oil is formulated for older vehicles and/or high-temperature climates, if thicker oil is preferred. 10w30 and 10w40 weights are different. 10W-30 synthetic oil's range is between -25C/-13F to 30C/86F (sometimes -30C/-22F to 35C/95F) while a 10W-40 is from -30C/-22F to 40C/104F. This motor oil is also thinner in low temperatures.
So when you changed to 5-30 the clearances were bigger at start up so you had a little hammer effect until the oil pressure came up. At normal operating temperature, a single grade oil with a viscosity rating of 5 would be too thin to protect our engine. Oil should be changed after the first 20-30 hours of operation and every 100 hours of run time thereafter.
The viscosity of the winter number is tested at 0 degrees Fahrenheit. For K-Series and Magnum engines, use SAE 30 oil for temperatures above 32 degrees F. Click to see full answer.
. .
The 5W-20 will have a lower viscosity and provide less resistance than the 10W-30 at both start-up and normal engine operating temperatures.
The lower the number before the W (for "winter"), the better it flows in cold temperatures.
The 0W-20 oil range is between -40F to 68F.
When to Use 10w30 vs 5w30. A premium synthetic blend mixed-fleet engine oil formulated to protect lower-emission 2017 greenhouse (GHG17) diesel engines. AMSOIL Signature Series 5W-30 showed 38% less oil consumption than the tested conventional oil, requiring less-frequent top-offs, in the ASTM D5800 NOACK volatility test - 100% fully synthetic 3 Best motor oil brand - Castrol 5W-40 engine oil 3 Best motor oil brand - Castrol 5W-40 engine oil. A significant temperature drop will thicken the oil, hindering its flow and eventually hindering the engine performance. Focusing more on the second part of the rating - the '30' versus '40' - we know that the engine oil with a 10W40 rating will be able to retain its 'thickness' or viscosity a lot longer than the engine oil with a rating of 10W30.
The reason for this flexibility is that it comes with a special additive called polymer that changes its traits when temperature rises or falls. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for .
GD-H1311 Engine Oil Noack . The thinner the oil viscosity, the better the fuel economy will be because the lubricant flows easier. Apr 8, 2005 We're in America. Promotes improved fuel economy in new-generation engines. By contrast, 10W30 is slightly more viscous in cold . . This oil behaves normally in these ambient temperatures.
Temp. Engine oils are generally formulated oils. This oil does not offer a wide operating temperature range like the 5W30, but it is still great for use in a large range of environments. The "w" behind the five and the 10 indicates that those are the viscosities in colder or winter temperatures. However, it's a comparatively thicker oil and has a consistency similar to grease. You will first need to know what oil viscosity is and what the numbers of . These specs allow 10w30 engine oil to operate under hot conditions for extended periods without undermining engine performance. 5w30 Vs 10w30 Comparison If your car needs SAE 10W-30 engine oil, Castrol offers a range of options, all of which flow like 10 Weight oil when cold, and 30 Weight oil at full engine operating temperature. But they both have the same high or operating temperature viscosity rating of 40. The oil in your car flows properly when it is at a normal temperature which means 100 degrees Celsius. 10W30 - Multigrade Oil. 10W-30 : 10W-40 : 10W : 5W-30 : 5W-20 Note that machine operating temperatures - and lubricant temperatures - does not change significantly with different ambient temperatures. The operating temperature of 10w30 is more common than the operating temperature of 10w40. SAE 10w-30 engine oil. For a cold start, the engine prefers a lower viscosity so that the oil can quickly move around and lubricate the engine parts.
This was an ordinary 10W30 CJ-4 oil but with a FL1995 Powerstroke style filter, which is a bit more efficient than the standard FL784. Pail Bottle-30 to 200 Amber: Yes: 0000000: 0000: 12: 00000000: 00000: 10W-30: 5 gal. BROWSE CATALOG. The difference between 10w30 and 10w40 is the thickness of the oil at operating/high temperatures, at which 10w40 is thicker than 10w30. Stens 770-133 . this is a 2013 unit,. The 30 refers to the viscosity at higher temperatures.
Decomposition temperature : No data available Viscosity Viscosity, dynamic : No data available . All season formula for operation in broad temperature range; Antioxidants prevent rust and erosion; Meets API SL Rating; Priced per case, sold per case; Specially formulated for small engines; 10w30 is suited for hot temperatures while 5w30 works best at colder areas such as Canada and Los . If the oil will be in the engine during winter and you live in a place where .
20: this is the oil's viscosity rating at high temperatures.
Yes, for operating at lower temperatures with retaining the proper fluid viscosity, SAE 10W30 motor oil is the best-suited option.
Valvoline Advanced Full Synthetic, the motor oil designed to protect today's sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. manual says use syn.
For example, let's dissect what "5W30" means. When your engine is being broken in the bearing wear allows for the viscosity of the break in oil. 10W30 vs 10W40 Differences. The last number represents the equivalent oil grade when it is hot. In this case, the 5w30 is as viscous as a straight 30 weight oil.
10w30, however, has a smaller temperature window.
Knowing the temperature spectrum helps you choose the right oil. It says 10W-30 is good from -25C to 40C (it would never get below -10C anywhere I ever go!)
10w30 is a multi-grade gear oil that changes its viscosity level as temperature changes. Range, F: Color: With Detergent : Each: .
It is recommended for temperatures down to -20 degrees Fahrenheit.
We offer a variety of . I have a tractor mower that changes to a snow blower for the winter,. Personnally, I feel much more comfortable down around the 260 to 270 range. Oil flow Temperature range for 5w30 and 5w40; 5w30 is used in temperature ranges from -25C to 25C, while 5w40 from -25C to 35C.
certified SAE 10W30 4Stroke Marine Engine Oil is recommended for general, alltemperature use.
The low-temperature viscosity rating of 10w40 is '10' whereas for 115w40 it is '15'. Answer (1 of 14): Surejust don't drive in winter,, and don't speed in summer. Temp.
Most engine manufacturers recommend a 5W or 10W oil for cold-weather starting. For working viscosity of 30, this parameter should be at least 2.9 at 150g. There are no much differences between the two oils in terms of the temperature range. 10W30 - Multigrade Oil.
A straight 30 weight oil is very thick cold and thins out a lot as it heats up. The 5340 motor oil can also be used in a temperature range of negative two hundred fifty (-250) degrees celsius to three hundred fifty (350) degrees celsius.
Range, F: Color: With Detergent : Each: . SAE 10W-30, 55 gallon drum. Therefore, a product with a 0 or 5 cold weather rating will be thinner and will flow more easily than a 10 or 20 rated one. by craftsman,.
Mobil Super Synthetic 10W-30 is a full synthetic high-performance motor oil that provides excellent high temperature protection even under severe operating conditions. 10W30 is referred to as a multi-grade oil or blended oil. 10w30 is easier to find and much less expensive than 10w40. That's why we use a multigrade oil like 5w30. In stock and ready to ship. Below 40F (4.4C) and down to -10F (-23C), use 10W-30. KOHLER SAE30 OIL PN 25 357 02-S case (12/1 qt.)
BROWSE CATALOG. In comparison, the 5W20 oil range is -31F to 68F, while 5W30 is rated for -31F to 104F. Both have almost the same characteristics, and the only difference is the oil viscosity.
A significant temperature drop will thicken the oil, hindering its flow and eventually hindering the engine performance. The viscosity index for the 15w40 motor oil stands at 135, whereas for 10w40, it is 150. 10W30. In SAE 30, there is one number. The fix is additives.
Different oil types can work best at certain temperatures. and 40 grade can be as thin as 12.5 cST (Centistokes) or as thick as 16.2 cSt at that temp.
Repco's range of Caltex engine oils has been selected to protect the life and performance of your engine, with a core range of products to suit your needs i would say if you have an older aircooled vw SAE 10W-30- Varying temperature range, this grade of oil improves cold-weather Purchase the right oil for your engine at shop SAE 30 w is usually . The "20" winter, in the 20w-50, is the oil viscosity when cold.
Technical Data Sheet Shell ROTELLA T5 10W-30 Better Fuel Economy Performance Improved Low Temperature Flow Synthetic Blend Technology Heavy Duty Diesel Engine Oil Shell ROTELLA T5 heavy duty engine oil with Triple Protection PlusTM technology has been enhanced with synthetic base oils plus advanced additive technology to protect against wear, deposits and oil breakdown,
oil 5w40 you can get better use out of the oil if the Temp. Older engines can use the SAE30, while the 10W30 is for modern engines.
10 is the cold weather viscosity rating for 10W30. Some people have the misconception that 10W-30 and 10W-40 engine oils are fundamentally different. has a ,wide range.
what this means is that the oil industry scientists, in their labs, have created lubricants that flow better at low temperatures than . Jun 5, 2002. It has two numbers: xx-W-yy.
5w-20. I'm serious: ANY oil will work, for a while, but if you want it to start in winter, and last a long time, follow the Book!
This difference is because 10w30 motor oil is a multigrade oil, which means that it can maintain an ideal viscosity over a wider temperature range. The difference between 10W30 multi - grade and straight grade oil is that it has been formulated to provide a 10W viscosity at very low temperatures to aid in cold-cranking in heavy engines. 10w30 is a upgrade, I use syn. It is designed to help provide long engine life and outstanding protection in vehicles of all ages, outperforming our conventional-synthetic blended . At 100C operating temperature, both SAE 30 and SAE 10W30 oil act the same with a rarely visible difference.
"5W" - the oil has a relative viscosity of "5" in "winter", which means it will flow quite easily in cold temperatures. To a great extent, this indicator gives an idea of how much the oil sustains in extreme loads.
------------------. This number represents an oil's ability to maintain its resistance to hardening and thickening at 0 degrees Celsius. Note that operational temperature is a different thing, which is typically higher than the ambient temperature. Delo 400 ZFA SAE 10W-30. ; SAE 10W-30- Varying temperature range, this grade of oil improves cold-weather starting, but may increase oil consumption. They consist of mineral, semi- or fully synthetic base oil (base stocks) plus a varying number and amount of additives. The quality of an engine oil depends on the base stock and its properties as well as on the additives.
0000000: 000000: Semisynthetic Base Oil. Provides high performance piston deposit control and turbocharger . Unless the temp drops below zero, 32 deg is generally in the middle of the temp spectrum for most oils. Due to new technology, there are oils that are much thinner, especially used on Japanese models with var.
Mobil told the Spring Mountain mechanics if it was below 300, on the track, don't worry about it. Oddometer: 298. . 5w30 oils have a temperature range of -22 degrees Celsius to 35 degrees Celsius while that of 10w30 oil is between -18 degrees Celsius to 30 degrees Celsius. In SAE 30, there is one number. Temperature - Fuels oil viscosities vs. temperature. Pail Read to know more about the oil grades before taking a final decision on which to use on your lawnmower. The oil is less slippery when it cools down to 25C or thereabouts.
w: this stands for "winter," and is part of the "5" rating. % ASTM D5185: 0.059:
The oil used should meet Ford's specification of WSS-M2C171-D or API CI-4 PLUS, CI-4/SL or DHD-1.
You see, the Mobil 1 SAE 10W30 oil replaces many straight 30 oil compatible engines. Learn which one to choose for your climate. Is not 30 grade oil always 30 grade? At operating temperatures, both oils will have the same viscosity (30) and will flow and protect identically. Sadly, that quick answer doesn't make it any easier to understand. Today's advanced engine technology requires advanced protection.
The number after the dash indicates how well the oil flows when it's warm. The lower the number, the thinner the oil. 10w40 is thicker, and creates less pressure but has more film strength.
A wide range. AMSOIL 10W-40 Formula 4-Stroke Marine Synthetic Motor Oil contains the best anti-wear base oils and additives on the market. Some manufacturer's allow this option, others don't, because it depends on the engine and the . It's actually about 320 when the oil start to lose it's effectiveness.
Choose from our selection of sae viscosity grade 10W-30 oil in a wide range of styles and sizes.
If you are running a vehicle in a hot area with a temperature as high as 40 (104), choose 5w30 motor oil .
5w30 works excellently under high temperatures and will thus provide more excellent motor protection. 10W-30 Oil Temperature Range The ambient temperature range (the temperature outside) for 10W-30 oil is -30 degrees Celcius (-22 F) and 35 degrees Celcius (95 degrees).
If it is a multi-grade say 10-30 then the bearing clearances will be greater.